Desing-Rite Inc., DR 150 Hi-Tech

Design-Rite Inc. DR 150 HI-TECH
COMPACTOR CONTROL SYSTEM

Data Logger

STANDARD FEATURES
Eliminates Limit Switches and Pressure Switches
Selection of Standard Compactor, or Standard Compactor with Electric Eye Operation
Selection of Ram Forward or Ram Returned Machine Shut-Off
Selection of up to 9 multi-cycles
Unit Part Full Detection and Unit Part Full Light
Unit Full Detection and Unit Full Light
System Error Diagnostic Lights
1 Second Time Delay from Ram Forward to Ram Reverse
1 Second Time Delay from Ram Reverse to Ram Forward
Eliminates Bottoming of Cylinder on Forward Stroke
Automatic Shutdown if Maintained Output Contact Electric Eye is Continuously On for more than 15 Minutes. ( with multi-cycle switch set to zero )
Automatic Shutdown if Ram Forward Stroke Time is Exceeded in Auto Mode
Automatic Shutdown if Ram Return Stroke Time is Exceeded in Auto Mode
No Machine Calibration required, Self Calibrates on 1^st Auto Cycle
Equipped with Manual Bypass
FCC Class A Approved
UL Recognized

HI-TECH COMPACTOR OPTIONS
Manual Pendant (Remote Hand Operator)
Auto Pendant (Remote Automatic Operator)
Compactor Door Limit Switch
Hydraulic Oil Heater
Electric Eye
Sonozaire^TM Odor Neutralizer
Zep^(r) Automatic Deodorant Dispenser
Other Options as needed

The Hi-Tech compactor control system consists of an approximately 7" x 6" microprocessor based control card (Model # DR150), a DRX50 wiring interface card, a motor starter and a control power transformer on a sub-plate in a NEMA 3R electrical enclosure. The DR150 control card replaces the standard relay panel and performs the necessary control of the hydraulic cylinder according to a factory programmed operation's logic.

The DR150 control card accepts input signals through the DRX50 wiring interface card from panel pushbuttons, selector switches and card mounted controls such as multi-cycle rotary selector switch (SW3), mode selection switches (SW1 & SW2), and motor current sensor. The card performs logic according to an internal program, and controls the necessary output signals such as motor starter, solenoid(s), and light(s) to control a commercial hydraulic trash compactor. The compactor sizes ranging from 3 HP unit to 20 HP unit, all having a single stage pump and a standard cylinder.

Back to the Top

Data Logger
	STANDARD FEATURES Eliminates Limit Switches and Pressure Switches Selection of Standard Compactor, or Standard Compactor with Electric Eye Operation Selection of Ram Forward or Ram Returned Machine Shut-Off Selection of up to 9 multi-cycles Unit Part Full Detection and Unit Part Full Light Unit Full Detection and Unit Full Light System Error Diagnostic Lights 1 Second Time Delay from Ram Forward to Ram Reverse 1 Second Time Delay from Ram Reverse to Ram Forward Eliminates Bottoming of Cylinder on Forward Stroke Automatic Shutdown if Maintained Output Contact Electric Eye is Continuously On for more than 15 Minutes. ( with multi-cycle switch set to zero ) Automatic Shutdown if Ram Forward Stroke Time is Exceeded in Auto Mode Automatic Shutdown if Ram Return Stroke Time is Exceeded in Auto Mode No Machine Calibration required, Self Calibrates on 1^st Auto Cycle Equipped with Manual Bypass FCC Class A Approved UL Recognized
	HI-TECH COMPACTOR OPTIONS Manual Pendant (Remote Hand Operator) Auto Pendant (Remote Automatic Operator) Compactor Door Limit Switch Hydraulic Oil Heater Electric Eye Sonozaire^TM Odor Neutralizer Zep^(r) Automatic Deodorant Dispenser Other Options as needed
	The Hi-Tech compactor control system consists of an approximately 7" x 6" microprocessor based control card (Model # DR150), a DRX50 wiring interface card, a motor starter and a control power transformer on a sub-plate in a NEMA 3R electrical enclosure. The DR150 control card replaces the standard relay panel and performs the necessary control of the hydraulic cylinder according to a factory programmed operation's logic. The DR150 control card accepts input signals through the DRX50 wiring interface card from panel pushbuttons, selector switches and card mounted controls such as multi-cycle rotary selector switch (SW3), mode selection switches (SW1 & SW2), and motor current sensor. The card performs logic according to an internal program, and controls the necessary output signals such as motor starter, solenoid(s), and light(s) to control a commercial hydraulic trash compactor. The compactor sizes ranging from 3 HP unit to 20 HP unit, all having a single stage pump and a standard cylinder.
	Back to the Top